E308LT1-1 Stainless Steel Flux Cored Welding Wire Made In China
Core Function: To efficiently join austenitic stainless steels of the AISI 304/304L/308 type using a semi-automatic, gas-shielded, flux-cored arc welding (FCAW-G) process that provides high deposition rates and all-position capability.
Typical Applications:
Structural Fabrication: Stainless steel frames, supports, and platforms.
Process Industry: Tanks, vessels, ductwork, and piping systems for:
Food & Beverage Processing
Chemical & Pharmaceutical Plants
Water & Wastewater Treatment
Architecture & Construction: Handrails, decorative structures, facade supports.
Transportation & Repair: Railcars, ship components, trailer fabrication.
General Manufacturing: Equipment manufacturing where stainless steel is required for corrosion resistance.
Material Compatibility (Base Metals):
Primary Match: AISI 304, 304L, 308, 308L.
Can Also Weld: 321, 347 (for certain applications, but 347 filler is preferred for stabilization).
Common Dissimilar Joint: Mild steel to stainless (requires specific procedure, but 308L chemistry can accommodate).
E308LT1-1 Stainless Steel Flux Cored Welding Wire chemical composition % :
C | Mn | Si | P | S | Ni | Cr | Mo | Cu | |
ACTUAL RESULT | ≤0.04 | 0.5-2.5 | ≤1.0 | ≤0.04 | ≤0.03 | 9.0-12.0 | 1.8-21.0 | ≤0.75 | ≤0.75 |
E308LT1-1 Stainless Steel Flux Cored Welding Wire Mechanical Properties：
Tensile Strength Rm（MPa） | Yield Strength Rel（MPa） | Elongation A（%） | Impact Value -196°C KV2（J） | |
ACTUAL RESULT | ≥520 | ≥420 | ≥25 | 35 |
Q1: Can I have a sample for testing?
A: Yes, we can support free sample.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us,for the MOQ for OEM/ODM talk with us please.
Q3: What are the benefits of being a distributor?
A: Special discount Marketing protection.
Q4: Do you have inspection procedures for welding wires and welding electrode?
A: 100% self-inspection before packing. We provide Quality Certification for every order.
Q5: Can we mix itmes in one 20FT container?
A: Yes,welding wire and welding electrode can mix them in one container.
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit of factory, or we can have a online meeting for factory inspection.
Q7: What is the lead time for samples and mass production?
A: Samples can be ready within 3-5 working days. For mass production, it usually takes 15-25 working days, depending on the order quantity and customization requirements.
Q8: What payment terms do you accept?
A: We accept T/T (30% deposit in advance, 70% balance against B/L copy), L/C at sight, and Western Union for small orders. Other terms can be negotiated for long-term cooperation.