| Quantity: | |
|---|---|
ER309L
SZESHANG
ER309L is a low-carbon, austenitic stainless steel filler metal. The "ER" stands for Electrode or Rod, "309" is the AWS classification for its specific chemical composition, the "L" denotes it has Low carbon content (typically ≤ 0.03%).
Application
Dissimilar Steel Welding (The Most Common Use area):
Welding Stainless Steel (304, 316) to Mild or Low-Alloy Steel. This is its classic application (e.g., attaching stainless fittings to a carbon steel pipe, welding a stainless flange to a carbon steel vessel).
Welding 304L to 316L where a higher alloy filler is acceptable.
Joining various dissimilar stainless grades.
Overlay Cladding / Hardfacing:
Used to deposit a corrosion-resistant stainless steel layer onto a carbon or low-alloy steel base. This provides the corrosion resistance of stainless at a fraction of the cost of a solid stainless component (common in chemical processing vessels, pulp and paper digesters).
Welding Similar 309/309S Base Metals:
For joining components made of 309 or 309S stainless steel, which are used for high-temperature applications.
Repair Welding:
Useful for repairing castings of unknown composition or where dilution is a concern.
Chemical Composition of Wire: (%)
| C | Mn | Si | Ni | Cr | Mo | |
| Standard | ≤0.03 | 1.0-2.5 | 0.3-0.65 | 12.0-14.0 | 23.0-25.0 | ≤0.75 |
| Typical | 0.025 | 2.10 | 0.36 | 12.0 | 23.82 | 0.007 |
Mechanical Properties of Deposited Metal
| Tensile Strength | Yield Strength | Elongation | |
| σb(Mpa) | Rel（MPa） | δ5 (%) | |
| Standard | ≥550 | ≥400 | ≥30 |
| Typical | 570 | 535 | 40 |
Exhibitions and Fair
Q1: Can I have a sample for testing?
A: Yes, we can support free sample.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us,for the MOQ for OEM/ODM talk with us please.
Q3: What are the benefits of being a distributor?
A: Special discount Marketing protection.
Q4: Do you have inspection procedures for welding wires and welding electrode?
A: 100% self-inspection before packing. We provide Quality Certification for every order.
Q5: Can we mix itmes in one 20FT container?
A: Yes,welding wire and welding electrode can mix them in one container.
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit of factory, or we can have a online meeting for factory inspection.
Q7: What is the lead time for samples and mass production?
A: Samples can be ready within 3-5 working days. For mass production, it usually takes 15-25 working days, depending on the order quantity and customization requirements.
Q8: What payment terms do you accept?
A: We accept T/T (30% deposit in advance, 70% balance against B/L copy), L/C at sight, and Western Union for small orders. Other terms can be negotiated for long-term cooperation.
A: Yes, we offer professional after-sales service. Our team will assist you with any questions or problems regarding product usage, storage, or other aspects after delivery.
ER309L is a low-carbon, austenitic stainless steel filler metal. The "ER" stands for Electrode or Rod, "309" is the AWS classification for its specific chemical composition, the "L" denotes it has Low carbon content (typically ≤ 0.03%).
Application
Dissimilar Steel Welding (The Most Common Use area):
Welding Stainless Steel (304, 316) to Mild or Low-Alloy Steel. This is its classic application (e.g., attaching stainless fittings to a carbon steel pipe, welding a stainless flange to a carbon steel vessel).
Welding 304L to 316L where a higher alloy filler is acceptable.
Joining various dissimilar stainless grades.
Overlay Cladding / Hardfacing:
Used to deposit a corrosion-resistant stainless steel layer onto a carbon or low-alloy steel base. This provides the corrosion resistance of stainless at a fraction of the cost of a solid stainless component (common in chemical processing vessels, pulp and paper digesters).
Welding Similar 309/309S Base Metals:
For joining components made of 309 or 309S stainless steel, which are used for high-temperature applications.
Repair Welding:
Useful for repairing castings of unknown composition or where dilution is a concern.
Chemical Composition of Wire: (%)
| C | Mn | Si | Ni | Cr | Mo | |
| Standard | ≤0.03 | 1.0-2.5 | 0.3-0.65 | 12.0-14.0 | 23.0-25.0 | ≤0.75 |
| Typical | 0.025 | 2.10 | 0.36 | 12.0 | 23.82 | 0.007 |
Mechanical Properties of Deposited Metal
| Tensile Strength | Yield Strength | Elongation | |
| σb(Mpa) | Rel（MPa） | δ5 (%) | |
| Standard | ≥550 | ≥400 | ≥30 |
| Typical | 570 | 535 | 40 |
Exhibitions and Fair
Q1: Can I have a sample for testing?
A: Yes, we can support free sample.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us,for the MOQ for OEM/ODM talk with us please.
Q3: What are the benefits of being a distributor?
A: Special discount Marketing protection.
Q4: Do you have inspection procedures for welding wires and welding electrode?
A: 100% self-inspection before packing. We provide Quality Certification for every order.
Q5: Can we mix itmes in one 20FT container?
A: Yes,welding wire and welding electrode can mix them in one container.
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit of factory, or we can have a online meeting for factory inspection.
Q7: What is the lead time for samples and mass production?
A: Samples can be ready within 3-5 working days. For mass production, it usually takes 15-25 working days, depending on the order quantity and customization requirements.
Q8: What payment terms do you accept?
A: We accept T/T (30% deposit in advance, 70% balance against B/L copy), L/C at sight, and Western Union for small orders. Other terms can be negotiated for long-term cooperation.
A: Yes, we offer professional after-sales service. Our team will assist you with any questions or problems regarding product usage, storage, or other aspects after delivery.
